Lanthanide SMMs Based on Belt Macrocycles: Recent Advances and General Trends

Enhancement of axial magnetic anisotropy is the central objective to push forward the performance of Single-Molecule Magnet (SMM) complexes. In the case of mononuclear lanthanide complexes, the chemical environment around the paramagnetic ion must be tuned to place strongly interacting ligands along either the axial positions or the equatorial plane, depending on the oblate or prolate preference of the selected lanthanide. One classical strategy to achieve a precise chemical environment for a metal centre is using highly structured, chelating ligands. A natural approach for axial-equatorial control is the employment of macrocycles acting in a belt conformation, providing the equatorial coordination environment, and leaving room for axial ligands. In this review, we present a survey of SMMs based on the macrocycle belt motif. Literature systems are divided in three families (crown ether, Schiff-base and metallacrown) and their general properties in terms of structural stability and SMM performance are briefly discussed.     

Spectroscopic properties and bond dissociation energies of PbX,PbX±, PbX2 and PbX2± (X ​= ​F,Cl, Br,I)

Ab initio calculations have been performed to investigate some of the spectroscopic properties, like geometry, frequency, electron affinity, ionization potential and finally adiabatic bond dissociation energies (BDEs) of lead monohalides, lead dihalides and their ions viz. PbX, PbX^±, PbX₂, $\mathrm{P}\mathrm{b}{\mathrm{X}}_{\mathrm{2}}^{\pm }$ (X ?= ?F, Cl, Br, I) in their ground state at the QCISD(T)//MP2 level of theory using correlation consistent basis sets. For the validation of MP2 optimized geometry and frequency, we further obtained geometry and frequency of all the neutral and ionic systems using QCISD(T) method with the same basis sets. The BDEs of PbX₂ molecules are calculated using the BDEs of $\mathrm{P}\mathrm{b}{\mathrm{X}}_{\mathrm{2}}^{\pm }$ ions and taking ionization potential and electron affinity of various systems. The calculated values are found in good agreement with the available data. Most of the data for ionic systems are reported first time in literature.     

On the metabolites produced by Colletotrichum gloeosporioides a fungus proposed for the Ambrosia artemisiifolia biocontrol; spectroscopic data and absolute configuration assignment of colletochlorin A

Ambrosia artemisiifolia L. is responsible for serious allergies induced on humans. Different approaches for its control were proposed during the COST Action FA1203 “Sustainable management of Ambrosia artemisiifolia in Europe” (SMARTER). Fungal secondary metabolites often show potential herbicidal activity. Three phytotoxins were purified from the fungal culture filtrates of Colletotrichum gloeosporioides, isolated from infected leaves of A. artemisiifolia. They were identified by spectroscopic and chemical methods as colletochlorin A, orcinol and tyrosol (1, 2 and 3). The absolute configuration 6’R to colletochlorin A was assigned for the first time applying the advanced Mosher’s method. When assayed by leaf-puncture on A. artemisiifolia only 1 caused the appearance of large necrosis. The same symptoms were also induced by 1 on ambrosia plantlets associated with plant wilting. On Lemna minor, colletochlorin A caused a clear fronds browning, with a total reduction in chlorophyll content.     

Smarandache函数在两数列上的下界估计

设S(n)是Smarandache函数,其中n是一正整数.讨论Smarandache函数S(n)在数列F((2k),1)=F(n,1)=n2n+1(n=2k)与数列G(2n,1)=(2n)2n+1上的下界估计.基于初等方法证明了:当偶数n≥6时,有S(F((2k),1))=S(F(n,1))≥6×2n+1;当n≥4时,有S(G(2n,1))≥6×2n+1.     

Temperature Effects on the Fracture Dynamics and Elastic Properties of Popgraphene Membranes

Popgraphene (PopG) is a new 2D planar carbon allotrope which is composed of 5–8–5 carbon rings. PopG is intrinsically metallic and possesses excellent thermal and mechanical stability. In this work, we report a detailed study of the thermal effects on the mechanical properties of PopG membranes using fully-atomistic reactive (ReaxFF) molecular dynamics simulations. Our results showed that PopG presents very distinct fracture mechanisms depending on the temperature and direction of the applied stretching. The main fracture dynamics trends are temperature independent and exhibit an abrupt rupture followed by fast crack propagation. The reason for this anisotropy is due to the fact that y-direction stretching leads to a deformation in the shape of the rings that cause the breaking of bonds in the pentagon-octagon and pentagon-pentagon ring connections, which is not observed for the x-direction. PopG is less stiff than graphene membranes, but the Young's modulus value is only 15 % smaller.     

On the derivation of the entropy of ideal quantum gases confined in a three-dimensional harmonic potential

In this work,the entropy functions of ideal quantum gases in a three-dimensional harmonic trap are analytically calculated using temperature as an explicit variable.Afterward,the applicability of the analytical formulas is validated by comparison with the numerical calculation.The results illustrate that the obtained functions could be applied for the whole temperature regime with a maximum relative deviation of less than 7.5%in the vicinity of the critical temperature Tcin the case of Bose gases.Meanwhile,for Fermi gases,although the analytical formula fits well at very low-and high-temperature regimes,it cannot be applied at temperature in the range[0.3-0.5]T_F,where T_F is the Fermi temperature.In addition,the consistency between our formulas and classical ones at significantly high temperatures is also discussed.     

Study of nucleon-nucleon and alphanucleon elastic scattering by the Manning-Rosen potential

Although often used in molecular dynamics, in this work the Manning–Rosen potential is parameterized to compute the scattering phase shifts for the nucleon–nucleon and the alpha-nucleon systems by exploiting the standard phase function method. We obtain excellent agreement in phase shifts with the more sophisticated calculations up to partial waves ${\ell }=2.$     

一种超导重力仪磁悬浮力的等效计算

为实现超导重力仪磁悬浮力的精确计算,以GWR型超导重力仪为模型基础,采用有限元的思想,将超导球表面电流理想化为多个等高共轴电流环,计算出各个电流环与超导线圈的作用力,求和得到线圈与超导球间的磁悬浮力。利用MATLAB完成计算程序实现,通过改变下线圈电流和上、下线圈电流比,获得满足一定条件的磁悬浮力及其梯度。选取合适的模型参数,计算出线圈对质量为m=4.069 g超导球的磁悬浮力大小为:Ftotal=3.988×10^-2N,磁悬浮力梯度为:-9.699×10^-3N/m,此时悬浮力梯度合适,满足系统稳定性和灵敏度的要求。     

Graphdiyne-actinyl complexes as potential catalytic materials: A DFT perspective from their structural,bonding, electronic and redox properties

Versatile graphdiyne (GDY) substrate has been modified by numerous transition metals and resulting composites showed excellent photo/electro-catalytic performance. However, GDY materials modified by actinides that are stockpiled waste product due to large-scale use in nuclear industry, are particularly scarce and remains great challenge. To deeply understand the structural properties, GDY complexating actinyl (An^mO₂)ⁿ⁺ (An = U, Np, Pu; m = VI, V) species with its atomistic pore was investigated by relativistic density functional theory (DFT). The GDY pore was found suitable to hold actinyl species, by forming organometallic AnC dative bonds. This chemical coupling interaction was further confirmed by quantum theory of atoms-in-molecule and electronic structure calculations. The GDY-uranyl(V), for instance, shows a π(UC) bonding HOMO, which is anticipated to improve electron transfer between ligand and metal. Orbital structures and compositions of complexes suggest their implication towards catalysis, which were further corroborated by calculations on redox potentials of GDY-actinyl complexes. Hence, our results show the potential applications of GDY complexating actinyl species towards novel catalytic surfaces.     

Observation of unusual Griffith’s phase behavior in quadruple perovskite oxide CaCu3Mn4O12 (CCMO) synthesized through chemical route

The CaCu₃Mn₄O₁₂ (CCMO) ceramic was successfully synthesized through the chemical route. The phase formation was confirmed by the X-ray diffraction pattern. Thermogravimetric (TGA), FT-IR, SEM, TEM, EDX, and XPS analysis were performed for investigation of the thermal behavior, phase identification, microstructural analysis, elemental analysis and oxidation state of the CCMO ceramic respectively. FT-IR spectra confirmed the existence of MnO₆ octahedral in body-centered cubic (BCC) complex perovskite oxide that resembles the CaCu₃Ti₄O₁₂ structure. The average particle size was observed by TEM in the range between 100 and 200 nm. AFM shows the average roughness of the surface was found to be in the range of 30 ± 5 nm. XPS and EDX studies confirmed the purity and oxidation state of the CCMO ceramic. The synthesized material shows very interesting unique Griffith’s phase (T_G) results that arise disorder in magnetic susceptibility in which ferromagnetic transition was to be observed in the paramagnetic region.